Summer Starts Here - Save up to 70%
Thule Trunk Bike Racks Review - 2010 Chevrolet Cobalt- Video
Today on our 2010 Chevrolet Cobalt we're doing a test fit of the Thule Raceway Pro Trunk Mount 2 bike rack. That part number is TH9001PRO. We already have our bike secured down. I'm first going to show you how we secure that down, and then we'll go over some features of the rack. You have two cradles in place with three straps, two on our frame, and then one as our anti-sway strap here in the back. We're going to pull and lift up to release those. Then we'll be able to pull our bike off the rack, and set it off to the side. more
2/2/2016 12:06:26 PM
Thule Archway Trunk Bike Racks Review - 2010 Chevrolet Cobalt- Video
Today on our 2010 Chevrolet Cobalt, we're doing a test fit of the Thule Archway XT Trunk Mount 2 Bike Rack. That part number is TH9009XT. We already have our bike secured down. We're first going to show you how we do that and then we'll go over some features of the rack itself. We have 2 cradles in place with 3 straps. 2 on our frame and 1 as our anti-sway strap in the back. We're going to start by removing our strap, pulling down and lifting up. more
2/2/2016 12:06:06 PM
Thule Raceway Trunk Bike Rack Review - 2010 Chevrolet Cobalt- Video
Today on our 2010 Chevy Cobalt well be test fitting the Thule Raceway Trunk Mounted 2-Bike Carrier, part number th9001. Now before we begin our test fit, we will first need to check the included instructions to determine what number our fit dial should be at. Once weve established this number, well set our carrier onto the vehicle. Well put the top hooks to the top part of the trunk, and the bottom hooks to the bottom part of the trunk. You may need to open up your trunk to get the bottom hooks in position. Well then turn the knobs in the left and right hand side of the carrier to tighten down the straps and secure the carrier to the vehicle. more
3/22/2013 9:01:35 AM
Yakima QuickBack 2 Bike Rack Review - 2010 Chevrolet Cobalt- Video
Today on our 2010 Chevy Cobalt, well test fitting the Yakima Quick Back trunk mounted two bike carrier, part number y02621. To begin our test fit well set the carrier onto the vehicle, well use the red knob on the center of the carrier to adjust the arms. Well then turn the red knob to tighten it down and secure the arms into position. Well then take the top straps of the top part of the trunk, the side straps to the side part of the trunk, and the bottom straps to the bottom of the trunk. You may need to open up your trunk to get the bottom hooks into position. Well then tighten down the straps and secure the carrier to the vehicle. more
3/20/2013 2:59:45 PM
Thule Passage Trunk Mounted Bike Rack Review - 2010 Chevrolet Cobalt- Video
Today on our 2010 Chevy Cobalt, well be test fitting the Thule Passage Trunk Mounted Two Bike Carrier, part number TH910XT.Now to begin our test fit, we'll first need to refer to the included instructions to determine what number the fit dial should be at. Once we have established this setting, we'll place the carrier onto the vehicle. We'll put the top hooks to the top part of the trunk, the side hooks to the side part of the trunk, and the bottom hooks to the bottom part of the trunk. You may need to open up your trunk to get the bottom hooks into position.We'll then tighten down the straps to secure the carrier to the vehicle. We'll secure the excess strap and were ready to load our bike.We'll undo the cradle straps, set the bike into the frame cradles and secure with the straps.That completes todays test fit for the Thule Passage Trunk Mounted Two Bike Carrier, part number TH910XT on our 2010 Chevy Cobalt. more
3/20/2013 2:58:58 PM
Thule Gateway Trunk Mount Bike Rack Review - 2010 Chevrolet Cobalt- Video
Today on our 2010 Chevy Cobalt well be test fitting the Thule Gateway Trunk Mounted 2-Bike Carrier, part number th9006xt. Before we begin our test fit, we are first going to refer to Thules Fit Guide or the included instructions to determine what number our fit dial should be at. After setting our fit dial, well place the carrier onto the vehicle. Well put the top hooks to the top part of the trunk, the side hooks to the side part of the trunk, and the bottom hooks to the bottom part of the trunk. You may need to open up the trunk to get the bottom hooks into position. Well then tighten down the straps to secure the carrier to the vehicle. more
3/20/2013 2:58:53 PM
Hollywood Racks Baja 2 Trunk Bike Rack Review - 2010 Chevrolet Cobalt- Video
Today on our 2010 Chevy Cobalt, well be test fitting the Hollywood Racks Baja trunk mounted two bike carrier, part number hrb2. Now to begin our test fit, well simply set the carrier onto the vehicle; well use the black levers on the left and right hand side of the carrier to adjust the carrier to fit the vehicle. The cradle arms do need to be level or slightly angled up. Once weve established this position, well lock back the levers in place; well then take the top strap to the top part of the trunk, the side straps to the side part of the trunk, and the bottom straps to the bottom part of the trunk. You may need to open up the trunk to get the bottom hooks in position. Well then tighten down the straps to secure the carrier to the vehicle. more
3/20/2013 2:58:43 PM
Hollywood Racks Expedition Trunk Bike Rack Review - 2010 Chevrolet Cobalt- Video
Today on our 2010 Chevy Cobalt, well be test fitting the Hollywood Racks Expedition Trunk Mounted Two Bike Carrier, part number HRF6-2.088.Now to begin our test fit, we'll set the carrier onto the vehicle. We'll use the top set of levers on the left and right hand side of the carrier to open up and adjust the arms to fit the carrier to the vehicle. We'll then lock them in position and use the top straps to the top part of the trunk, the side straps to the side part of the trunk, and the bottom straps to the bottom part of the trunk. You may need to open your trunk to get the bottom straps hooked in position.We'll then tighten down the straps to secure the carrier to the vehicle. We'll then adjust the arms of the carrier on the lower set of levers, we'll open up and swing the cradle arms out. The cradle arms do need to be level or slightly angled up.Once we establish this angle, we'll lock the arms into position, secure the access slack of the straps, and were ready to load our bike. more
3/20/2013 2:58:39 PM
Filter Videos
Filter Videos
